kptseng 2 Posted March 25 Share Posted March 25 Hello Everyone, I have an old amplifier board which I would like to convert into a PCB gerber drawing. Do you know of anyone who can help to do that for a small fee? It is a small board about 120x80mm, approx 55 components, single layer. Thank you. Link to post Share on other sites
puremilk 5 Posted March 26 Share Posted March 26 sim lim tower basement there is a company doing it,you can check with their price. But if know how to DIY PCB you can do it yourself. 1 Link to post Share on other sites
shoestring_audio 4 Posted March 26 Share Posted March 26 Hello, have direct messaged you 🙂 Link to post Share on other sites
puremilk 5 Posted March 27 Share Posted March 27 18 hours ago, shoestring_audio said: Hello, have direct messaged you 🙂 didnt receive your message. Link to post Share on other sites
shoestring_audio 4 Posted March 27 Share Posted March 27 1 hour ago, puremilk said: didnt receive your message. Sorry, I meant @kptseng Link to post Share on other sites
kptseng 2 Posted March 29 Author Share Posted March 29 Hello Thank you for your message. I have already created the schematic on Digikey's Scheme-It app. I was planning to convert it to a PCB software like the KiCAD but I am not so confident in doing it especially when I am not electronic trained and I understand that there are other factors to consider. How do you see you are able to help me? Thank you. KP Link to post Share on other sites
shoestring_audio 4 Posted March 31 Share Posted March 31 On 3/29/2021 at 5:54 PM, kptseng said: Hello Thank you for your message. I have already created the schematic on Digikey's Scheme-It app. I was planning to convert it to a PCB software like the KiCAD but I am not so confident in doing it especially when I am not electronic trained and I understand that there are other factors to consider. How do you see you are able to help me? Thank you. KP Hello KP, please contact me on DM/PM with your whatsapp number or email to provide details. As this is a commercial enquiry in nature, I believe it is against forum rules to continue what could finally constitute as solicitation. I understand you are looking for something for a small fee as it otherwise wouldn't make economic sense. Link to post Share on other sites
decatech 2 Posted April 1 Share Posted April 1 On 3/26/2021 at 10:27 PM, puremilk said: sim lim tower basement there is a company doing it,you can check with their price. But if know how to DIY PCB you can do it yourself. what do u use to etch the pcb? Link to post Share on other sites
Junior 0 Posted April 4 Share Posted April 4 Perhaps is good to know the availability of the components of your amplifier since you mention old. Link to post Share on other sites
puremilk 5 Posted Saturday at 02:04 PM Share Posted Saturday at 02:04 PM (edited) On 4/1/2021 at 4:11 PM, decatech said: what do u use to etch the pcb? in old school we use Ferric chloride Ferric cholride in common layman name is a kind of iron salt,uses for some industrial water processing and not for consuming. Edited Saturday at 02:14 PM by puremilk Link to post Share on other sites
Recommended Posts