Jump to content

continue part3 of 300B 845 typology 1-interstage drive


Recommended Posts

Typology 1:

to give 300B work in full swing driving voltage a 1:2 ratio interstage is being made,+-70V rms driving voltage without problems,you get bottom to high note in full power.

68545829nVa.jpg

68545834jHg.jpg

68545835dFo.jpg

 

today completed the insertion of laminated core,air gap DC current tested.

68570952uAn.jpg

next project to try c core to compare with EI core sounding

68570954hAq.jpg

drive 300B to optimise power

 

Fine tune the core with measurement taken and ultimate hearing 

68578432SaP.jpg

68578431MiH.jpg

the interstage work well for driving 845 tube too

 

my next typology for driving 300B 845 is a CCS chip design

Link to post
Share on other sites

for interstage core material is important, while you need to know some factors for low signal application,it is unlike the output transformer core factors,I fine tune it with experiments.

Link to post
Share on other sites
  • 3 weeks later...

Core material though important, I would think a mix & match on the circuit topography  in used is just as important. Everything affects sound, from my own findings when one uses too many goodies the sound will not be very balanced especially in the bass region. 

Cheers

 

 

Link to post
Share on other sites

×
×
  • Create New...