wcseow 10 Posted December 4, 2020 Share Posted December 4, 2020 22 minutes ago, rock123 said: Up was some 1st batch of Audio Codec HT signs (easily blueTac onto wall as shown below ) 2nd batch of my belove HT Brands Signs is in shipping progress now, including a batch reaching soon ( for a group of kakis 🙂 , d Now on 7.2.4 running on Preferred Front heights and Back Rears . 6 heights ready on ATMOS 13.1 layout. FH\TM\BR Planning potential add on 1 or 2 more speaker. Nice. May I know where did u get that from? Thanks Link to post Share on other sites
whitesox 0 Posted December 12, 2020 Share Posted December 12, 2020 On 11/30/2020 at 5:23 PM, rock123 said: Panels are up with Laser alignment in place. Will need to re-adjust the paintings and speakers position Wow awesome good match in color.... room treatment huh... tempting me to visit you again... partly bcoz of durian pizza also. hahahaha Link to post Share on other sites
rock123 16 Posted December 23, 2020 Author Share Posted December 23, 2020 All the HT signs ready in the house ! Planning ending setup in 2020 ! Link to post Share on other sites
rock123 16 Posted December 23, 2020 Author Share Posted December 23, 2020 Branding Signs arrive complete. Merry Christmas and advanced Happy Near Year cheers. 2 Link to post Share on other sites
rock123 16 Posted January 1 Author Share Posted January 1 (edited) Going to a new year 2021, I have finally completed my plan very basic full MK Speakers 10.1 Auro 3D setup that my current AVR which can support with the following layout that have 5 ground speakers and 5 Height speakers including VOG. Thus will run 5.2.4 for Atmos & DTS-X (going to 7.2.4 as same before. as have 2 rears speakers new cabling re-laid ) Have also 2 up front current in ceiling speakers on standby for 7.2.6 if i upgrade to a 13 or 15 channel AVR\AVP 2021 plan will have to add the front center Height for Auro3D too. Last but not least a Happy Brand New Bless Healthy new year to every bro here. Edited January 1 by rock123 Link to post Share on other sites
rock123 16 Posted January 1 Author Share Posted January 1 A Sneak preview for the new height speakers. Will like to take this opportunity to thank @Winthur from Ovation United whom oversee my heights speakers installation project. All speakers were LASER Aligned mounted to perfection ! Wife is super happy with the works WAF well done! Today Painting is completed. 1 Link to post Share on other sites
rock123 16 Posted January 1 Author Share Posted January 1 After playing around, am set on Front Heights and Rear Heights Configuration all working well. 🙂 Native Atmos movie 1 Link to post Share on other sites
rock123 16 Posted January 1 Author Share Posted January 1 Upmix to Auro3D 1 Link to post Share on other sites
rock123 16 Posted January 1 Author Share Posted January 1 Watching the mandalorian Season 1 . Upmix to Auro3D . Just awesome Heights. 1 Link to post Share on other sites
rock123 16 Posted January 1 Author Share Posted January 1 Playing DTS-X Native movie utilzing the 4 heights automatically No upmix option as it is Dts-X Native which already utilized 4 heights as above. Good to go. Can Enjoy Auro3D , ATMOS and Dts-X ! 1 Link to post Share on other sites
rock123 16 Posted January 1 Author Share Posted January 1 Bought original Demo disc from Auro arrived in 3 days damn fast. For those whom nev hear it. Journey To the West highly recommended! Heights and VOG in action ! 1 Link to post Share on other sites
Recommended Posts